| Frequency Coverage: | 118.000-136.975 MHz |
| Frequency Separation: | 25 kHz (760 channels) |
| Frequency Stability: | .003%-20º to +60º C (-4ºto +140º F) |
| Frequency Control: | Microprocessor phased lock loop |
| Display: | 2-line, 8-character liquid crystal with backlight |
| Memory Channels: | 25 pilot programmable with channel 25 as priority channel |
| Modulation type: | Amplitude Modulation |
| Input voltage: | Emergency Minimum... 10.5 volts |
| Normal............................. 13.8 volts | |
| Maximum........................ 16.0 volts | |
| Power consumption: | Receive............................ 87mA squelch on & no audio (typical) |
| Transmit.......................... 1.2 amps |
| Speaker output: | Typically 5 watts at 4 ohms |
| Headphones: | 100 mV in to 600 ohms |
| Microphone impedance: | Typically 4K ohm |
| Microphone types: | Electret or amplified dynamic |
| Other Temperature: | -20º to +70º C (-4 to 158º F) |
| Sensitivity: | Better than 12 dB @ 1.00 uV |
| Selectivity: | -70 dB |
| Transmit carrier output: | 4 watts carrier (12 watts P.E.P) nominal |
| Size: | 65 mm wide x 59 mm high x 135 mm deep (with connector 170 mm) |
| 2.6" wide x 2.3" high x 5.3" inches deep (with connector 6.7") | |
| Exposed dial face size: | 2¼" (57 mm) standard aviation instrument hole |
| Weight: | 14 oz (400 grams) |
| Options available: | Mic- 45 Boom Microphone, Light weight headset- ideal for gliders |
| Antennas, Speakers | |
| Wiring Harness & custom wire harnesses | |
| Microair commes selector (VHF, UHF etc) |
| Warranty: | Mic-45 Boom Microphone, Light weight headset- ideal for gliders |
| Type approvals: | SMA (Australia) ECR 203A Type approval number 203A3002 |
| Australian Civil Aviation Safty Authority VFR 25,000 ft | |
| FAA (VFR) FCC (USA) Belgium, Canada, Czech Republic, NZ, South Africa, UK |