| Ionizing equipment |
- Ionizing tube with compressed air supply across the total width of the machine effectively solves the problem of static charges in the textile.
|
|
Ink system |
- Circulating ink system with software-controlled pressure regulation.
- Analog pressure regulation on shuttles.
- Ink filter with shut off quick coupling on inlet and outlet.
- Circulation in the ink reservoirs to prevent sedimentation.
- Hose system in PTFE enables quick and effective cleaning.
- Software-controlled interruption of machine operation if pressure falls outside the tolerance zone.
|
|
| Drying system |
- Heater between shuttles 1 and 2 for maximum color saturation.
- Hot air dryer with recirculation directly after shuttles.
- PID-type temperature regulation with overheating protection.
- Centrifugal fans with frequency converters provide optimal drying and low noise levels.
- Software-controlled interruption of machine operation if temperature falls outside the tolerance zone.
|
Alarms |
- All types of alarms are monitored by the Jetflag™ controller software to give the operator full control over the various alarms.
- The alarm is detected by the machine's input/output device. This system is also linked to the interlocked protective guards, the drying system, the end of textile reel, ink pressure and error messages from the servo system and any external units.
|
|
| Computer and software |
- PC with Windows 2000 operating system.
- Texdot® Jetflag™ software including software for analyzing and calibrating the machine's software-controlled subsystems.
|
The print head |
- The print head units are interchangeable and can be replaced easily by hand without tools.
- Texdot® supplies the JP200cvt with a double set of print heads to minimize down-time on the machine.
- The print heads are recyclable.
|
|
|
